General

This editor lets you configure general features of discovered storage arrays.

This screen has the following fields:

General Details

Equipment Name -- The identifier for the array.

Vendor -- The brand of the array. Use the + or - buttons to select this if discovery did not automatically populate this field.

Location -- The location of the array. Use the + or - buttons to select this if discovery did not automatically populate this field. See Locations for information about configuring locations.

Contact -- The contact for the array. Use the + or - buttons to select this if discovery did not automatically populate this field. See Contacts for information about configuring contacts.

Equipment Icon -- The icon that appears in the portlet.

Model -- The model of the array.

Last Modified -- The date this array was last modified.

Discovery Date -- The date this array was discovered.

Equipment Details / Properties

IP Address -- The IP address for the array.

DNS Hostname -- The DNS host for the array.

Firmware Version -- The firmware version for the array.

Hardware Version -- The hardware version for the array.

Model -- The model of the array.

Serial Number -- The serial number of the array.

Software Version -- The software version for the array.

Manage B y Hostname -- Check to manage by hostname rather than IP address.

Equipment Type -- The software version for the array.

Equipment Details / Settings

This tab has the following fields:

System Object Id -- The Sys object ID of the array.

Date Created -- The date the Open Manage Network Manager record for the array was created.

Creator -- The logged in user who created the record for the array.

Install Date -- The date the array was installed.

Administrative State -- The administrative state of the array (Not Determined, Unlocked, Locked, Shutting Down).

Operational State -- The operational state of the array (Not Determined, Enabled, Active, Busy, Disabled).

Notes -- Enter text to describe the array here.