Configuring Load Balancer

Exact Synergy+HA_XXXX.zip, and import into your host or VM. The XXX portion of this filename may vary from version to version.

Use VMware Workstation (for lab) or VMware ESX (for production) or you can use own load balancer.

Follow these steps to configure your Load Balancer:

1. Enter the Networking screens.

2. Set your Static IP

3. Add multiple web server IP addresses and apply.

4. Optionally: Reboot the load balancer

After adding web server IPs, users can log into the load balancer IP address. The load balancer uses a round-robin algorithm to distribute the load among webservers.