Redcell Synergy supports the BIG-IP F5 load-balancing appliance and software. It supports the following capabilities, and requires the listed device configurations:

• SNMP -- This requires adding the IP address from which you manage the F5 to its Client Allow List under System -> SNMP -> Agent -> Configuration). Supports SNMP-based default device/resync using the ifTable - creates interface sub-components.

• Event Management -- SNMP Trap Definitions (Tip: search for event definitions beginning with “big”).

• Reports -- Run any default Redcell Synergy reports against F5 inventory.

Features not supported

• Any CLI-based functionality (NetRestore, CLI Cut-Thru, and so on)

• Link Discovery

• Port creation